簡要描述：19095N-123I美國原裝安捷倫HP-INNOWax毛細管色譜柱代理批發，上海連橋生物科技有限公司授權代理安捷倫耗材配件，美國安捷倫耗材*。
產品型號
廠商性質
更新時間
瀏覽次數
相關文章
| 品牌 | Agilent/安捷倫 | 供貨周期 | 現貨 |
|---|
上海連橋生物科技有限公司*安捷倫儀器配件耗材代理商安捷倫Agilent為客戶提供一整套包括分析儀器、實驗室裝備、軟件、服務、耗材和試劑在內的實驗室綜合解決方案。
美國原裝安捷倫HP-INNOWax毛細管色譜柱代理
本公司同時代理以下品牌實驗室儀器配件耗材試劑：、沃特世、島津、熱電、菲羅門、戴安、瓦里安、默克、CEM、西格瑪、肖特、奧立龍、美國GE、美國伯樂、瑞士萬通、梅特勒、哈希、賽多利斯、密理博、艾本德等。
美國原裝安捷倫HP-INNOWax毛細管色譜柱代理
以下為安捷倫其他型號的儀器配件的貨號供參考，您也可以聯系我們提供貨號獲得報價。
| 5067-6589 | Seal Prep |
| 5067-6605 | UIB Clamp Guide Infinity II Kit |
| 5067-6620 | InfinityLab Convenience Kit Bio-inert |
| 5067-6621 | InfinityLab Capillary Kit Bio-inert |
| 5067-6642 | Check valve for G7161A/B pump 50mL/min |
| 5067-6652 | 1290 Infinity Service Kit for LL/EM PHs |
| 5067-6697 | Method Dev.Cap Kit, 8 long columns, QCHE |
| 5067-6800 | Delay Coils for 4-8 mL/min |
| 5067-6801 | Delay Coils for 15-40 mL/min |
| 5067-6802 | Delay Coils for 40-80 mL/min |
| 5067-6804 | Delay Coils for 80-200 mL/min |
| 5067-6845 | Fitting Adapter coned 5/16-24M 10-32F ST |
| 5067-6849 | Column Holder Kit M |
| 5068-0006 | Stator 2ps/6pt QC, P: C/D |
| 5068-0012 | Rotor 2pos/10port 1200Bar |
| 5068-0031 | 2 ul Capillary Loop (SST) |
| 5068-0032 | 5 ul Capillary Loop (SST) |
| 5068-0033 | 20 ul Capillary Loop (SST) |
| 5068-0034 | 50 ul Capillary Loop (SST) |
| 5068-0035 | 100 ul Capillary Loop (SST) |
| 5068-0051 | 10 ul Capillary Loop (SST) |
| 5068-0097 | Stator, 12pos/13 port Bio valve 200 bar |
| 5068-0099 | Rotor, 2 pos/6 port Bio valve 600 bar |
| 5068-0123 | Rotor 8 pos/9 Port Purge Valve, 1200 bar |
| 5068-0198 | Injection valve rotor seal for G7167B |
| 5068-0263 | Stator 4-Col. Sel QC, P: A/B |
| 5068-0264 | Rotor Seal 4-Col. Sel QC, EK, P: A/B |
| 5068-0268 | Rotor Seal, 6 Port Injector-Prep; 600bar |
| 5068-0319 | Re-Build Kit ManInject Prep |
| 5068-0321 | Stator Face ManInject Prep |
| 5069-4524 | Water Filter Connector |
| 5080-8755 | Sample refinery gas 1 liter |
| 5080-8756 | Sample natural gas 2 liters at 60psig |
| 5080-8759 | TOGA Test Gas Sample 16oz (473mL)120psig |
| 5080-8768 | Low Boiling Point Calibration Sample No2 |
| 5080-8769 | Standard sample |
| 5180-4169 | O-Ring 12/PK, Fluoroelastomer, 0.176inID |
| 5181-1246 | Dissolution filter, 1/8in probe, 1000/pk |
| 5181-3311 | Washer, spring 10/PK |
| 5181-3389 | Outlet splitter |
| 5181-3390 | Fixed inlet splitter 0.22mm id |
| 5181-3391 | Fixed inlet splitter 0.32mm id |
| 5181-3392 | Fixed inlet splitter 0.53mm id |
| 5181-8837 | Packed injection port kit |
| 5181-8863 | Source cleaning kit |
| 5182-0774 | Trap, BOCARB 4000 |
| 5182-0775 | Trap, VOCARB 3000, 7695 and 3100 P+T |
| 5182-0781 | Trap, Tenax/Silica Gel/Charcoal |
| 5182-0783 | Trap, Tenax |
| 5182-0792 | Female Luer connector for sample valve |
| 5182-0794 | 25ml Needle Sparger Kit |
| 5182-0795 | 5ml Needle Sparger Kit |
| 5182-0796 | 25ml Fritless Sparger Kit |
| 5182-0845 | 25ml Sparger Kit |
| 5182-0846 | 5ml Frit Sparger Kit |
| 5182-0847 | 25ml Needle Sparger |
| 5182-0848 | 5ml Needle Sparger (Glassware Only) |
| 5182-0849 | 25ml Fritless Sparger (Glassware Only) |
| 5182-0850 | 5ml Fritless Sparger (Glassware Only) |
| 5182-0851 | 25ml Frit Sparger (Glassware Only) |
| 5182-0852 | 5ml Frit Sparger (Glassware Only) |
| 5182-2581 | APG remote cable |
| 5182-3477 | TCD Back Ferrule for 1/8in inlet 10/PK |
| 5182-9652 | S/SL Gold Seal Disk with Cross |
| 5182-9673 | TCD Frnt Ferr for 0.53mm id col 10/PK |
| 5182-9676 | TCD Frnt Ferr for 0.32mm id col 10/PK |
| 5182-9677 | TCD Frnt Ferr for 0.25mm id col 10/PK |
| 5182-9679 | TCD Front Ferrule, no hole 10/PK |
| 5182-9722 | 6890 NPD Ceramic Insulator/Metal Seal KT |
| 5182-9748 | PTFE guide for SLH, 10/PK |
| 5182-9753 | Empty inserts with one swirl hole 10/PK |
| 5182-9754 | Graphpack-2M connector 0.2mm |
| 5182-9755 | PTV Septumless Head for 6890GC |
| 5182-9757 | VAlve body for SLH |
| 5182-9758 | Spring for SLH |
| 5182-9759 | Kalrez seal for SLH |
| 5182-9760 | Sealing element for SLH |
| 5182-9761 | Graphpack-2M connector 0.32/0.25mm |
| 5182-9762 | Graphpack-2M connector 0.53mm |
| 5182-9763 | Silver seal 5/PK |
| 5182-9775 | Viton Seal for SLH Septumless Head 5/PK |
| 5183-0362 | Declaration of Conformity |
| 5183-2096 | HP5973 w/Diffusion Pump 1 Yr Maint Kt |
| 5183-4649 | Crossover Ethertwist Cable, 10ft |
| 5183-4652 | MIcro GC Replacement Filters 5/PK |
| 5183-4735 | Sparger 25ml Frit for 3000/2000/7695 |
| 5183-4736 | Sparger 5ml Frit for 3000/2000/7695 |
| 5184-3517 | GC/MS Checkout Standards Kit |
| 5188-1447 | Trap, U Sha Tenax Stamp 1A |
| 5188-2790 | Trap, Tenax (No. 1) |
| 5188-2791 | Trap,Tenax/Silica gel/char 12inx18in No3 |
| 5188-2794 | Trap,OV-1/Tenax/Sil gelr,12inx1/8in(5) |
| 5188-2795 | Trap, VOCARB 3000, Velocity P+T |
| 5188-2796 | Trap, VOCARB 4000 |
| 5188-2797 | Trap, BTEX |
| 5188-5241 | S/SL Insulation Kit, 3 Pieces |
| 5188-5244 | Response Linearity Standard, 3x1 mL amp |
| 5188-5245 | FPD Sample |
| 5188-5347 | OFN NCI Checkout standard 100 fg/uL |
| 5188-5348 | OFN EI Checkout standard 1 pg/uL |
| 5188-5357 | PFHT - HighMass Checkout Sample |
| 5188-5367 | Gold Plated Inlet Seal with Washer |
| 5188-5372 | FID MDL test sample 3x0.5 ml ampoules |
| 5188-5953 | FPD Check Out Sample, Meth. Parathion |
| 5188-6493 | QuickPick Split Inlet PM Kit |
| 5188-6494 | QuickPick Splitless Inlet PM Kit |
| 5188-6495 | Split vent trap PM kit,single cartridge |
| 5188-6496 | QuickPick Split Vent + Inlet PM Kit |
| 5188-6497 | QuickPick Splitless Inlet/Vent PM Kit |
| 5188-6498 | QuickPick Purged Packed Inlet PM Kit |
| 5188-6523 | LCMS Sulfa Drug OQPV Kit |
| 5188-6524 | PA tuning solution set |
| 5188-6525 | ICP-MS internal Std Mix |
| 5188-6526 | 6020 Interference Check Solution A 100ml |
| 5188-6527 | 6020 Interference Check Solution B 100ml |
| 5188-8052 | Needle Seat, EK,5pk |
| 5188-8053 | ERI Remote and Leak Module |
| 5188-8057 | Fraction Collection Remote Y-Cabel |
| 5188-8813 | Trap,BTEX + MTBE |
| 5188-8814 | Trap (No. 5),OV-1/Tenax/Silica Gel/Char |
| 5188-8815 | Trap (No. 8),Carbopak B/Carbosieve S-III |
| 5188-8816 | Trap (No. 9),Proprietary |
| 5188-8817 | Trap,Tenax/Silica Gel/Carbosieve S-III |
| 5188-8818 | Strat-Trap,Tenax/Silica Gel No. 2 |
| 5188-8819 | Strat-Trap,Tenax/Silica Gel/Charcoal No3 |
| 5188-8820 | Trap, VOCARB 3000, Stratum and Atomx P+T |
| 5188-8821 | Trap,VORCARB 4000 |
| 5188-8822 | Trap,BTEX |
| 5190-0123 | Electron Multiplier for 8800 ICP-MS/MS |
| 5190-0154 | Electron multiplier for 8900 ICP-QQQ |
| 5190-0469 | LC TOF/QTOF/QQQ sticide Test Mix. |
| 5190-0470 | LC/MS Forensic Toxicology Test Mixture |
| 5190-0482 | ASTM D6591-06 IP 548 Calib Std Kit 4x1ml |
| 5190-0483 | ASTM D6591-06 System Calib Std Kit 5x1ml |
| 5190-0484 | EN12916/ IP 391 Calib.Sols A-D 4x 1ml |
| 5190-0485 | EN12916/ IP391 Sys Cal Std 1+2 2x 1ml |
| 5190-0489 | Nitrosamine Checkout Mix 10 ug/L in MeOH |
| 5190-0490 | Residual Solvent Revised Mthd467 Class 1 |
| 5190-0519 | RGA Checkout Sample with Argon |
| 5190-0521 | Greenhouse Gas Checkout Sample |
| 5190-0530 | Cell cleaning sol for UV/VIS 1L |
| 5190-0531 | IRM calibrant for GC/TOF 1 x 0.5mL |
| 5190-0551 | LC/MS sticide Comprehensive mix 8x 1mL |
| 5190-0555 | LC/MS tox comp mix 1mL |
| 5190-0556 | LC/MS forensic tox checkout mix |
| 5190-0557 | Tox comprehesive test submix 1 1mL |
| 5190-0558 | Tox comprehesive test submix 2 1mL |
| 5190-0559 | Tox comprehesive test submix 3 1mL |
| 5190-0560 | Tox comprehesive test submix 4 1mL |
| 5190-0561 | Tox comprehesive test submix 5 1mL |
| 5190-0562 | Tox comprehesive test submix 7 1mL |
| 5190-0563 | Tox comprehesive test submix 8 1mL |
| 5190-0565 | Tox comprehesive test submix 6 1mL |
| 5190-0580 | Entprise Edtn LCMS OQ/PV sulfa std 6x2mL |
| 5190-0591 | ESI Negative Ion rformance Std |
| 5190-0921 | Sapphire Window |
| 5190-1401 | Cleaning Powder,Dielectric Capillary |
| 5190-1445 | Strat-trap, OV-1/Tenax (No. 7) |
| 5190-1446 | Strat-trap, Tenax (No. 1) |
| 5190-2209 | Gold Plated inlet Seal and Washer, 10/pk |
| 5190-2231 | 25 mL fritless Sparge Glssware Kit Atomx |
| 5190-2232 | 25 mL frit Sparge Glassware Kit, Atomx |
| 5190-2233 | Vessel, 15 mL Amber IS |
| 5190-2234 | Syringe, 27 mL with Side Port |
| 5190-2235 | Antifoam agent, Antifoam 1520, 10 mL |
| 5190-2265 | Sample loop, 1mL certified, deactivated |
| 5190-2266 | Sample loop, 3 mL certified, deactivated |
| 5190-3151 | Sample loop, 5 mL, EK AQUATek 100 |
| 5190-3152 | Sample loop, 25 mL, EK AQUATek 100 |
| 5190-3153 | Sample loop, 20 mL, EK AQUATek 100 |
| 5190-3154 | Sample loop, 10 mL, EK AQUATek 100 |
| 5190-6144 | Gold Seal, Ultra Inert, w/Washer |
| 5190-6145 | Gold Seal, Ultra Inert, w/Washer, 10/PK |
| 5190-6149 | Gold Seal, Ultra Inert, w/Washer, 50/PK |
| 5190-6167 | Forensic Toxi Submix 10 3 x 1mL |
| 5190-6887 | delaytime calib sol for 1260LC/MS 2 x5mL |
| 5190-7004 | Filter Element, HEPA, NW25/40 |
| 5190-9028 | RNA resolution standard 1mL |
| 5190-9029 | DNA ladder standard 1mL |
| 5190-9039 | Capillary Shell Weldment 6890, Inert |
| 5190-9040 | Split/Splitless Insert, 6890 EPC, Inert |
| 5190-9072 | Intuvo Polyimide Gasket 5/pk |
| 5190-9073 | Intuvo Nickel Gasket 2/pk |
| 5190-9074 | Intuvo Polyimide Gasket Plug 2/pk |
| 5190-9560 | 6890 UI Top Insert S/SL |
| 5190-9561 | IDP3 Tip Seal Kit |
| 5190-9613 | IDP-15 Tip Seal Replacement Kit |
| 5191-4192 | Emitter 10um W/Silica-Tip uncoated |
| 5191-4203 | G9223AA INT SSL Consumable Refill Kit |
| 5191-4204 | G9223AA INT MMI Consumable Refill Kit |
| 5410046300 | Disc carousel PSD 120, 130 samples, 1/pk |
| 5500-1251 | Capillary ST 0,12x400 SL/SL Long Socket |
| 5500-1252 | Capillary ST 0,17x400 SL/SL Long Socket |
| 5500-1264 | Capillary Ti 0.17x500 SL-SLV |
| 5610121600 | Mercury source lamp, Liberty ICP, 1/pk. |
| 5982-0024 | Butanetriol Int Std Num.1 for Biodiesel |
| 5982-0025 | Tricaprin Int Std Number 2 for Biodiesel |
| 6210092090 | Moulding Spraychamber Fluorinated |
| 6310001100 | Graphite tubes, plateau, coated, 10/pk |
| 6310001200 | Graphite tubes, partitioned, 10/pk |
| 6310001300 | Graphite pyrolytic platforms, 10/pk |
| 6310001600 | Graphite electrodes Deuterium GFAA, 1 Pr |
| 6310001700 | Graphite electrodes, Zeeman GFAA 1 Pair |
| 6310001800 | Graphite shroud Deuterium GFAA, 1/pk |
| 6310001900 | Graphite shroud, Zeeman GFAA 1/pk |
| 6310003100 | Graphite shroud for GTA 120, 1/pk |
| 6310003400 | Graphite electrodes for GTA 120, 1 pair |
| 6310003500 | Graphite electrodes GTA120 Zeeman 1 pair |
| 6310003600 | Graphite shroud for GTA120 Zeeman, 1/pk |
| 6310003700 | Graphite tubes, Omega platforms, 10/pk |
| 6610011600 | Plastic reagent vessel and cap 500mL 1/p |
| 6610011800 | Rinse reservoir for SPS 3,10 L, 1/pk |
| 6610017500 | Drip tray, AA sample compartment, 1/pk. |
| 6610020500 | Cary 50 dissolution tubing spares kit |
| 6610023000 | Microplate 384 well white hi-bind 50/pk |
| 6610023700 | Flow cell fluor, 10mm 40uL 1/pk |
| 6610023900 | Ultra-micro cell quartz, 1mm 8uL. 1/pk |
| 6610024000 | Sub-micro cell, quartz, 5mm, 40uL. 1/pk |
| 6610024100 | Sub-micro cell, quartz, 10mm, 80uL. 1/pk |
| 6610024200 | Sub-micro cell fluor, UV 10mm 40uL. 1/pk |
| 6610025100 | Spill tray,440 SPS3,1/pk |
| 6610025400 | SPS3 sample rack 60 tubes x 16mm od 1/pk |
| 6610025500 | SPS3 sample rack 40 tubes x 20mm od 1/pk |
| 6610026000 | Overlay for 40 place rack, 18 mm OD tube |
| 6610026100 | Overlay for 60 place rack, 13 mm OD tube |
| 6610026400 | SPS3 sample rack 90 tubes x 13mm od 1/pk |
| 6610026500 | SPS3 sample rack 24 tubes x 25mm od 1/pk |
| 6610026600 | SPS3 sample rack 21 tubes x 30mm od 1/pk |
| 6810008700 | Filter drierite - small |
| 6810009500 | Filter Flow Path outlet of mixer 8101031 |
| 6810009600 | Filter, solvent (40), 1/pk |
| 6818000600 | Replacement filter glass, Holmium Oxide |
| 6910001200 | O-ring (1/4 id x 3/8 od x 1/16)in |
| 6910004000 | O-ring nitr (1/16 id x 7/8 od x 3/32)in |
| 6910008200 | Neb bung O-ring , 7/32in id x 11/32in od |
| 6910009800 | O-ring 3/16 in id x 5/16 in od x 1/16 in |
| 6910010500 | O-ring burner base, nitrile. 1/pk |
| 6910013600 | O-ring 3/16 in id x 5/16 in od x 1/16 in |
| 6910036900 | O-ring screw bead adjuster, organic solv |
| 6910048090 | Syringe valve seal, 1/pk |
| 6910048700 | Seal,pumphead,quaternary,1/pk |
| 7010017100 | Drip tray for VGA 77, 1/pk |
| 7010017200 | Base plate, VGA77 AA hydride module 1/pk |
| 7210018900 | Graphite tube removal tool |
| 7210035500 | Filter 1 ABS Agilent AA certified, 1/pk |
| 7910019800 | IEEE cable, 4 m, metal covers, 1/pk |
| 7910028900 | Fiber optic probe lite shield Cary 1/300 |
| 7910033500 | Test tube holder, Cary 50/60, 1/pk |
| 7910043700 | ICP s/chamber double-pass glass cyclonic |
| 7910044400 | Torch body fully demountable, axial ICP |
| 7910044500 | Torch body fully demountable, radial ICP |
| 7910050700 | Torch one piece, ball joint ax 2.3mm inj |
| 7910051290 | Transfer tube FEP cycl s/c on radial ICP |
| 7910051490 | Transfer tube inert SM s/c on radial ICP |
| 7910051590 | Transfer tube FEP fm s/chamber axial ICP |
| 7910052500 | ICP spray chamber, Twister + Helix, 1/pk |
| 7910052600 | ICP s/chamber, Twister+Helix+Ball joint |
| 7910052700 | Glass transfer tube, 160 L incl. clip |
| 7910052800 | Glass transfer tube, 208 L incl. clip |
| 7910052900 | Torch one piece ball joint rad 1.4mm inj |
| 79826-87601 | CAP, Conn 1 |
| 79826-87602 | Cap, Conn 2 |
| 79826-87605 | CAP, CONN .5 |
| 79826-87606 | Capillary, 80 x 0.17mm |
| 79826-87607 | Capillary, 280 x .17mm |
| 79826-87608 | Connection, capillary, 400mm, 0.17mm id |
| 79835-04123 | Diaphragm |
| 79835-65213 | Replacement sieve for check valve crtrdg |
| 79835-67101 | Check valve cartridge |
| 79835-87330 | Solvent mixer |
| 79835-87638 | Column, connector |
| 79841-65501 | Lubricant |
| 79841-87609 | Capillary tubing, 35mm, 0.12mm id. |
| 79841-87610 | Capillary 60 mm |
| 79846-27101 | Seal, threaded end of syringe |
| 79846-67101 | Needle seat |
| 79846-87201 | Needle insert, 25 ul |
| 79846-87202 | Needle insert, 250ul |
| 79846-87601 | Syrng. Capillary 0.25um id, 100mm |
| 79846-87604 | 25ul Loop Capillary |
| 79846-87605 | Seat capillary, 0.12 mm id, 110 mm |
| 79847-60005 | Magazine rack for automatic sampler |
| 79853-68742 | WINDOWS FOR 79853C |
| 79853-68743 | GASKET No. 1 STD CELL(D) |
| 79880-22711 | Holmium Oxide filter |
| 79883-22404 | Window Screw, SST |
| 79883-27101 | High Pressure Seal Ring |
| 79883-28802 | High Pressure Compression washer |
| 79883-68700 | HI-PR-Cell Kit |
| 79883-68701 | Standard cell repair kit, 1050/1090 |
| 79883-68702 | Gaskets, cell 12/PK |
| 79883-68703 | Cell Screw Kit |
| 810133400 | Clamp bead adjuster, Polyprop., 1/pk |
| 810134300 | Clamp bush guide, 1/pk |
| 810134400 | Capillary guide for nebulizer, 1/pk |
| 810166900 | Standards rack SPS 3, 11 x 16mm od tubes |
| 810167000 | Standards rack SPS 3, 6 x 29mm od tubes |
| 810177600 | Tube holder for SPS 3 autosampler, 1/pk. |
| 810187500 | Mounting bkt, Twister s/c radial ICP 1/p |
| 810187600 | Mounting bkt, Twister s/c axial ICP 1/p |
| 815-0129 | Tubing polyurethane 1/8 x 1/4 in, r ft |
| 815-0485 | Tubing PTFE (.125od x 0.065id)in. r ft |
| 816-0018 | Kit microdissecting UMAS |
| 8500-0656 | PFTBA sample, 10 g |
| 8500-4328 | Headspace Evaluation Sample |
| 8500-4789 | Cap. Inlet Evaluation Sample, Split mode |
| 8500-5067 | RF, SAMPLE |
| 8500-6813 | Test Std, HP-FFAP (Capillary/Megabore) |
| 8500-6917 | Caffeine Standards Kit for LCMS |
| 8500-8510 | PFDTD Calibrant, 1 ml |
| 8660-0827 | Abrasive Mesh 4000 Grit |
| 8660-0852 | Abrasive Mesh (Micro-Grit Par) |
| 8710-2474 | Multifunction tool |
| 883-9750 | Attenuation screen, 1/pk |
| 884-1000 | Sample holder, UMA, 1/pk |
| 89075-23800 | MCT Adjustment Tool |
| 89090-84700 | Temrature Sensor Support |
| 899-1752 | Sample probe, tube, 1/pk |
| 899-1794 | Spare desiccant cartridge for FTIR, 1/pk |
| 910146400 | Plate hose adaptor, Cary Ext Sample Comp |
| 925-0128 | Polystyrene film, NIST traceable. 2/pk |
| 9300000400 | Filament,Rhenium (Re) alloy,3 x 0,1/pk |
| 9300014200 | SPRAY SHIELD, GOLD, API |
| 9300-1747 | Electrolyte Bottle Cap |
| 9310-4828 | Wis, industrial 300/PK |
| 9499342M002 | Oil mist filter element, DS402 vac. pump |
| 9499392M004 | Oil mist filter kit, DS402 vacuum pump |
| 9810039490 | Inert hi-solids sample intro kit, radial |
| 9810039590 | High solids sample intro kit, radial 1/p |
| 9810039690 | Dirty organic sample intro kit axial 1/p |
| 9810039790 | Aqueous sample intro kit, axial 1/pk |
| 9810039890 | Routine organic sample intro kit axial |
| 9810046390 | Hi-sens HF+TDS sample intro kit rad ICP |
| 9810046490 | Hi-sens hi-TDS sample intro kit rad ICP |
| 9810046590 | Flex sample intro kit, Hi-TDS + Org, ax |
| 9810046690 | Hi-sens sample intro kit axial ICP, 1/pk |
| 989-0083 | Lamp, 1/pk |
| 9910024400 | Venturi kit, EK, for barrel neb. 1/pk |
| 9910024500 | Nebulizer capillary kit, Pt/Ir, 1/pk |
| 9910024700 | Nebulizer cleaning wire, 3/pk |
| 9910024800 | Capillary tubing, high solids, 3m length |
| 9910025700 | Glass impact beads Mark V/VI/7. 5/pk |
| 9910026500 | O-ring/gasket kit, Mark VI spray chamber |
| 9910033300 | GTA shroud removal tool |
| 9910035200 | Barrel nebulizer O-ring kit, 1/pk |
| 9910040000 | VGA-76/77 Hydride absorption cell. 2/pk |
| 9910040200 | Gas-liquid separator VGA-76 for AA |
| 9910040700 | Mercury absorption cell VGA 76/77, 1/pk |
| 9910043700 | Nebulizer hi-vac barrel, 1/pk |
| 9910044000 | Capillary tubing, hi-vac nebulizer, 3/pk |
| 9910045700 | O-rings for Mark VI Univ s/chamber, 1/pk |
| 9910047700 | ND and Blue filter set with holder, 1/pk |
| 9910053300 | PTFE impact beads Mark V/VI/7. 5/pk |
| 9910053900 | Burner Cleaning + Alignment Card, 100/pk |
| 9910054400 | Quartz atomization cells, ACT-80, 10/pk |
| 9910056800 | Torch, semi-demountable for radial ICP |
| 9910057000 | Quartz injector 1.8mm Semi-demount 3/pk |
| 9910057200 | ICP sample compartment O-ring kit, 1/pk |
| 9910057300 | Injector holder kit, semi-demount torch |
| 9910057400 | Inert V-groove neb for inert SM s/chamb |
| 9910062000 | Gas-liquid separator VGA 77 for ICP 1/pk |
| 9910062100 | Hydride module for VGA 77, AA oration |
| 9910062200 | Hydride module for VGA 77, ICP oration |
| 9910063600 | Mixing paddles, Mark VI s/chamber, 5/pk |
| 9910066300 | Nebulizer adj. barrel, organic, 1/pk |
| 9910066800 | Temrature probe holder, square, 4/pk |
| 9910066900 | Temrature probe holder, tared, 4/pk |
| 9910068500 | UV-Vis reflectance probe holder, 1/pk |
| 9910070400 | Cooled double pass spray chamber for ICP |
| 9910071100 | Gas-liquid separator VGA-77 for AA |
| 9910077600 | Pump bands for SIPS 10/20, 10/pk |
| 9910080300 | Kit Cap Seals for SIPS 10/20, 10/pk |
| 9910081400 | O-ring kit for ICP Argon Saturation Accy |
| 9910081600 | O-ring kit for cooled spray chamber, 1/p |
| 9910084400 | Inert hi-solids sample intro kit, axial |
| 9910084700 | Torch, semi-demountable for axial ICP |
| 9910091200 | Furnace workhd viewing mirror GTA110/120 |
| 9910093000 | Nebulizer capillary kit Mark 7 s/c, 1/pk |
| 9910093100 | Nebulizer block, Mark 7 s/chamber, 1/pk |
| 9910093300 | VGA for Zeeman adaptor kit AA240/280 |
| 9910093400 | Mark 7 spray chamber O-ring kit, aqueous |
| 9910093500 | Mark 7 spray chamber O-ring kit, organic |
| 9910093600 | Mixing paddles fluorinated Mark 7, 5/pk |
| 9910097900 | Cable kit, Cary 50 Dissolution accy 1/pk |
| 9910100700 | Kit Organics Axial |
| 9910102500 | Hg flow thru cell holder AA 220/240G,1/p |
| 9910105800 | Liquid trap, Mark 7 spray chamber, 1/pk |
| 9910106300 | Torch, fully demountable for axial ICP |
| 9910106400 | Torch, fully demountable for radial ICP |
| 9910106900 | Kit, mounting brkt dem torch, radial ICP |
| 9910107000 | Kit, mounting brkt dem torch, axial ICP |
| 9910107100 | Gazfit fitting for ICP torch, 6mm, 4/pk |
| 9910107700 | Neb. EzyFit sample inlet 1.3mm od, 10/pk |
| 9910108200 | O-ring kit for fully demountable torch |
| 9910108300 | Kit Agilent aa certification, 1/pk |
| 9910111900 | SPS 3 probe 0.8mm id inert, PTFE sleeved |
| 9910112000 | SPS 3 probe 1.0mm id inert, PTFE sleeved |
| 9910112600 | Matrix Valu-Pack axial ICP + inert s/c |
| 9910112700 | Extenda Valu-Pack radial ICP + inert s/c |
| 9910112800 | Extenda Valu-Pack axial ICP + cycl. s/c |
| 9910113100 | High capacity carousel kit for GTA 120 |
| 9910116800 | Syringe kit for PSD-97/100/110. 1/pk |
| 9910117800 | All-Glass Sample System, Axial |
| 9910125200 | Tubing kit axial ICP ketone + inert s/c |
| 9910125600 | Hi Solids SIS kit, axial ICP w/cycl. s/c |
| 9910125700 | Hi Solids SIS kit, radial ICP w/cycl s/c |
| 9910125800 | Hi Solids SIS kit, axial ICP w/inert s/c |
| 9910125900 | Hi Solids SIS kit radial ICP w/inert s/c |
| 9910126000 | Application kit, Inert SIS for axial ICP |
| 9910126100 | Application kit Inert SIS for radial ICP |
| 9910126200 | Application kit Inert, radial ICP no s/c |
| 9910126300 | Organics SIS kit, axial ICP w/cycl. s/c |
| 9910126400 | Organics SIS kit, radial ICP w/cycl. s/c |
| 9910126500 | Organics SIS kit, axial ICP w/inert s/c |
| 9910126600 | Organics SIS kit, radial ICP w/inert s/c |
| 9910126700 | Aromatics SIS kit, axial ICP w/cycl. s/c |
| 9910126800 | Aromatics SIS kit radial ICP w/cycl. s/c |
| 9910126900 | Aromatics SIS kit, axial ICP w/inert s/c |
| 9910127000 | Aromatics SIS kit radial ICP w/inert s/c |
| 9910127100 | Ketones SIS kit, axial ICP w/cycl. s/c |
| 9910127200 | Ketones SIS kit, radial ICP w/cycl. s/c |
| 9910127300 | Ketones SIS kit, axial ICP w/inert s/c |
| 9910127400 | Ketones SIS kit, radial ICP w/inert s/c |
| 9910127500 | Volatiles SIS kit, axial ICP w/cool s/c |
| 9910127600 | Volatiles SIS kit, radial ICP w/cool s/c |
| 9910127800 | Nebulizer EzyLok gas connector, ICP-OES |
| 9910128300 | Flow cell repl ftg, PS325/335, 1/pk |
| 9910129500 | PSD 120 sampler carousel + cover, 1/pk |
| 9910130600 | Kit Exhaust Cabinet Hardware |
| 9910130900 | SPS 3 probe 1.3mm id inert, PTFE sleeved |
| 9910137800 | Kit, Needle U and Injection port seal |
| 9910141000 | Hi Solid SIS kit, axial ICP inert+sheath |
| 9910141700 | Kit external source (xe + d2), 1/pk |
| 9910143300 | SVS2 sample loop kit 2 (0.5mL) |
| 9910143400 | SVS2 sample loop kit 3 (1.0mL) |
| 9910143600 | SVS2 sample loop kit 5 (2.0mL) |
| 998-0000053-EHS | Union Elbow M5 |
| AS5001180 | Inlet filter,for 212 pump,1/pk |
| ASA5001009U10 | SEAL, 2mL PISTON, 212-LC, UHMW, 10PKG |
| ASA5001009U2 | SEAL, 2mL PISTON, 212-LC, UHMW, 2PKG |
| ASA5001133 | Inlet outlet cv crtdg,212-LC 2mL head |
| C-325CT15 | Container for EPA 325 TD tubes, 2/pk |
| CP490210 | 490 Micro GC set of 5 internal filter |
| CP736467 | 5 FILTERS for EXT.FILTER Assy |
| CP739531 | Membrane repls-BTU,Genie 170, 5/pk |
| CP740206 | Pump manifold Assy |
| CP741035 | Calibra smpl,SimDist (D2887E),hazd,1/pk |
| CP742210 | Duo Bed ncil Filter With Ferrules |
| CP742211 | Single Bed ncil Filter With Ferrules |
| CP85518 | Filter, 7 um, 1/pk |
| CP913246 | ICP nebulizer, PTFE MiraMist, 1/pk |
| CP913584 | Z-axis drive tubing, ASX 130/260, 1/pk |
| CP914394 | Mounting brkt Tracey inert s/c Axial ICP |
| CP914395 | Mounting brkt Tracey inert s/c Radl ICP |
| CP914396 | ICP Nebulizer Opalmist PFA conc. 2mL/min |
| CP914397 | ICP spray chamber Tracey TFE inert+Helix |
| CP914506 | ICP nebulizer, EK MiraMist, 1/pk |
| CP914708 | ICP s/chamber Tracey glass cycl + Helix |
| CP914815 | ICP nebulizer, Ceramic VEE spray, 1/pk |
| CP914870 | Torch radl hi-solid+ball joint 1.8mm inj |
| CP914879 | Alumina injector 2.4mm Semi-demount 1/pk |
| CP959366 | Neb SeaSpray 2mL/min at 1 L/min w/EzyFit |
| C-TBBIO | Bio monitoring TD tube |
| C-TBE10 | Empty Stainless Steel TD Tubes, 10 pack |
| C-TBME10 | Material Emissions SS Tubes C4-C32 10/pk |
| C-TBP1C1C | Carbograph 1 SS Tube for Pumd C5-C14 |
| C-TBP1CXC | Carb X SS Tubes for Pumd/Diffusion |
| C-TBP1TC | Tenex SS TD Tubes, Preconditioned/Capd |
| C-TBSM10 | Stack Monitoring SS TD Tubes, 10/pk |
| C-TBSVOC10 | SVOC SS TD Tubes, 10/pk |
| C-TBTAG10 | Tube Tags For SS Tubes, 10/pk |
| C-TNXTA | Tenax TA 35-60 Mesh, 10 Grams |
| C-UN010C | Universal SS Tubes, Pack of 10 |
| DY70007701 | Sparge Probe, S/N above 13160, Cleaned |
| G1072-20008 | Cylinder, draw out |
| G1091A | Configurable supplies kit for 8900 ICPMS |
| G1091A | Add Ni sampling cone, 8900 with x-lens |
| G1091A | Add Ni plated sampling cone, 8900+x-lens |
| G1091A | Add Pt sampling cone, 8900 with x-lens |
| G1091A | Add Pt sampling cone (18mm insert), 8900 |
| G1091A | Add Ni skimmer cone, 8900 with x-lens |
| G1091A | Add Pt skimmer, Cu base + skimmer base |
| G1091A | Add Pt skimmer, Ni base + skimmer baseAd |
| G1091A | Add Ni skimmer cone, 8900 with s-lens |
| G1091A | Add Pt skimmer Cu base, 8900 with s-lens |
| G1091A | Add Pt skimmer Ni base, 8900 with s-lens |
| G1091A | Mandatory option for 8900 with x-lens |
| G1091A | Mandatory option for 8900 with s-lens |
| G1091A | Mandatory 8900 option ORS w/ax accelerat |
| G1091A | Mandatory 8900 option ORS w/o ax. accel |
| G1099-20030 | Column Installation tool for 5973/5975 |
| G1099-20130 | ION Source Chamber |
| G1099-20132 | Reller Ultra-Clean, 5973 |
| G1099-20133 | Reller insulator |
| G1099-20136 | Transfer line sckt |
| G1099-80001 | High energy dynode, 5973 series |
| G1099-80039 | Oil Mist Filter, 3/8 BSP Male Threads |
| G1103-61611 | General Purpose Cable |
| G1120-60006 | 8453 UV Vis Stirring Module kit |
| G1120-62301 | Cell Holder, Multi Cell Transport |
產品分類
上一篇
